webeyeCMS
webeyeCONNECT Guides and Docs
Introduction webeyeCONNECT is an interface that will use webeyeCMS as the alarm receiver for alarm/CCTV systems and send signals to third party alarm platforms. This provides installers and end users with the full feature set of webeyeCMS whilst the ...
Adding a camera directly to webeyeCMS (No NVR)
webeyeCMS Direct to Camera head Integration Coming with webeyeCMS v3.4.0 we have integrated Hikvision and Dahua cameras directly into the platform without the need for an NVR/DVR. Hikvision Hikvision cameras can be connected to the platform either ...
Live Viewing via Sub Stream
Introduction We have now implemented a way for you to Live Stream back to your cameras via the sub stream. Upon requesting live footage, webeyeCMS will use the Sub-Stream by default with the option to change this to Main-Stream. How to change ...
Timeline
Introduction The timeline provides an overview of all events, including Video, Blind and SOS signals, along with any previously closed alarms. Signals or alarms generated within a short period of time are grouped together on the timeline. Selecting ...
Audio Challenge through webeyeCMS (1 way or 2 way)
Introduction Two-way audio challenge is now available straight through the webeyeCMS platform, allowing you to voice down to site and also listen to any possible intruders. If the NVR/Camera has an audio input or built in microphone then this will ...
Creating Groups, Sites & Devices - webeyeCMS v3.1
See attached.
Calipsa
Calipsa Calipsa is a software verification tool which allows uploaded videos to be checked for human and vehicle activity. When enabled, webeyeCMS will send each video signal from your system to the Calipsa platform for analysis. Once Human or ...
Snapshots
Introduction Snapshots can be taken whilst viewing alarm footage or whilst live streaming directly into a camera. These can then be saved as a reference to an alarm, or be sent as an email. Once a snapshot is taken they can be edited using the tools ...
Keyholders
Keyholders Introduction These can be used by alarm handlers for reference, and also to send them snapshots from devices. When adding Keyholders, a verification email is sent to the email address entered, an icon will be displayed once the email ...
Device Data Reports
This feature was released with webeyeCMS v3.0 - View the release notes Device Data Reports Supported devices can now send additional data to webeyeCMS to be recorded and displayed as a report. OCULi is currently the only device that supports data ...
Guide to Reporting in webeyeCMS
Please see attachments
Adding notes to sites and alarms
This feature was introduced with webeyeCMS v2.10. View the release notes here Communication is key, and granting users the ability to both record and retrieve information efficiently is a major factor in this. For this reason, webeyeCMS now has the ...
Arm and Disarm Alarms
This feature will be introduced with webeyeCMS v2.10. View the release notes here Alarms in webeyeCMS can be highly important events, such as an intrusion, but they can also be lower-priority informational events such as an arm or disarm. In some ...
Alarm Closure Statuses
This feature will be introduced with webeyeCMS v2.10. View the release notes here Closing Alarms When closing an alarm in webeyeCMS, you have previously been required to add notes to a free text field that looks similar to this: This has served us ...
Notification Alarm List, Alarm Delays and Deferring Alarms
This feature was enabled with webeyeCMS v2.10.1. View the release notes here The primary function of webeyeCMS is to bring alarms to your attention as fast as possible, 100% of the time. However, there are some cases where a user may not wish to see ...
New Video Email Notification Removal
In our continued mission to provide you with the most effective alarm receiving solution possible, we have always listened to our customers and based our road-map upon a combination of our own vision, and your feedback. In some cases, the features ...
Site Subscriptions and Notifications
webeyeCMS has long allowed you to specify which of your users receive Push Notifications (PNS) and SMS alerts, as well as providing a simple solution for blocking a site where you need to silence it temporarily. The webeyeCMS hierarchy allows you to ...
What is Signal Poll Failure?
Signal poll failure is a feature provided by webeyecms. When enabled on applicable devices, an alarm will be generated if no signals have been received for a defined period of time. Signal poll failure can be configured upon initial device creation ...
Saving Alarms in Webeye
By default, all alarms received in to webeye are saved for period of 2 years. This period can be extended by using the 'Save Alarm' feature. How to save both live and closed alarms Upon viewing either a live or closed alarm, selecting the ‘Save ...
Exporting Videos From Webeye
There are currently 3 ways in which a user can export videos from the webeye platform. All administrator users will have the ability to perform the outlined methods. The specific permissions required are outlined individually per method. 1. ...