What is Signal Poll Failure?
Signal poll failure is a feature provided by webeyecms. When enabled on applicable devices, an alarm will be generated if no signals have been received for a defined period of time.
Signal poll failure can be configured upon initial device creation or by editing the device.
The frequency of how often webeye checks for signals can be configured by using the drop down menus.
If your system is configured to send periodic test, or arm and disarm signals, these will count as signals and webeye will not generate signal poll failure alarms for the configured period.
Related Articles
Control Panel - Quick Start Guide
Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...Reconeyez - Setup Guide for webeyeCMS
Reconeyez - Setup Guide for webeyeCMS This guide will allow you to set up an 'Area' within the Reconeyez platform to alarm through to webeyeCMS. Prior to setting up devices, you will need to make sure that a gateway has been set up for your company ...webeyeCMS Platform
Latest Release: v4.3.0 - 6th May 2025 Below you will find a list of features added in recent versions of webeyeCMS. For more information, please contact us via this support portal v4.3 4.3.0 Integration and Bugfix Release Release Date: 6th May 2025 ...Vigileyez Receiver
Latest Release: v1.3 - 10th July 2025 Below you will find a list of features added in recent versions of the Vigileyez receiver. For more information, please contact us via this support portal v1.0 v1.3 Feature and Bugfix Release Release Date: 10th ...GV53MG Tracker Manual
See attached manual for the GV53MG trackers. Configuration of the device is done directly from webeyeCMS when added. Connecting the tracker Make sure the SIM Card is inserted. The tiny black sliding switch is pushed towards the SIM Card, this allows ...