Control Panel
RF Antenna - Assembly Guide
External RF Antenna - Assembly Guide Contents and Tools required Included Wall bracket Upright pole (with 2 circular mounting nuts) Antenna head 4x antenna spokes Antenna Cable Not Included H2 Hex bit Bracket assembly Take one of the circular nuts ...
RF Antenna - Installation
Installing RF Antennas Required Vigileyez Control Panel 2x RF Antenna Cable glands 16mm drill bit (if the holes are not already pre-drilled) Preparing the control panel If the sides of the control panel do not have a blanking gland OR is already ...
Control Panel - Quick Start Guide
Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...
Control Panel - Fitting the mounting plate
Control Panel - Fitting the mounting plate Positioning and Fitting the plate The mounting plate should be attached to the panel before fixing it to a structure. Ensure that the countersunk holes around the edge of the plate are facing away from the ...
Control Panel - LEDs Explained
Control Panel - Buttons and LEDs Buttons Switch 1 When the control panel is asleep, press SW1 to see the current status of the control panel (Power, Alarm State, Communication) When the control panel is awake, hold SW1 to change communication method, ...