Latest Release: v4.2.3 - 26th September 2024

v4.2

4.2.3 Bugfix Release

Release Date: 26th September 2024

Bugfix's

1. Fixed a bug with site names which contained a tabbed space, which prevented alarms from being received correctly.
   
2. Other backend quality of life improvements relating to user management and platform performance.

4.2.2 Bugfix Release

Bugfix's

1. Resolved an issue with alarms not displaying in the alarm list for sites with special characters within the name
   
2. Trackers with phone numbers outside of the UK can now be added to the configure page
   
3. Resolved an issue where reporting data was not showing for selected periods
   
4. Actions within the site LiveLink interface are now audited against the device correctly
   
5. The correct message is now displayed when using the reverse commands within the alarm interface
   
6. Backend performance enhancements

4.2.0 Feature Release

Integrations

1. M2M Communicator
   

Bugfix's

1. Connection loader icon moved to the location of the action within the alarm page
   
2. "Alarm closed by" now populated correctly on the Alarm history and alarm report pages
   
3. Removed subscribe button within the site interface for users without the subscription management permission (previously the button was displayed but would not work due to permission)
   
4. Resolved scrolling issue within Device reports when filter drop downs were open
   
5. Time added alongside date on the group level dashboard/report
   
6. Fixed auditing for webeyeCONNECT users when handling alarms via the connection token

v4.1

v4.1.1 Bugfix Release

Bugfix's

v4.1.0 Feature Release

Integrations

v3

v3.9

v3.9.1 Hotfix Release

1. Alarm history report has now been updated to include user/site correct time zones
   
2. Fixed an issue where some group level reports would not load

v3.9.0 QoL Release

1. All reports that include a date/time will now display in the site and user time zone (instead of being displayed in UTC)
   

1. Fixed a bug where clicking Update on the date picker would cause the whole report not to load

v3.8

v3.8.1 Hotfix Release

1. Resolved an issue where moving a device between sites would fail
   
2. Device status banner on site view now hidden for users without reporting permissions
   
3. Fixed alarm view issues for sites that contained an apostrophe " ' " within the site name

v3.8.0 Feature Release

1. Generic Receiver
   
1. Uniview (SMTP and RTSP)
2. Reolink (SMTP, RTSP for select cameras only)
   
3. Partizan (SMTP and RTSP)
   

1. Site LiveLink - allows a user to LiveLink all devices within a site, rather than going to each individual device
2. Enable 5MP Resolution Mode for OCULi HD Devices
   
3. Added new icons for skipping to the first or last page within the 'Alarm Signals' section of an alarm
   
4. Added Keyholder and Site Details buttons within LiveLink interfaces
   
5. Show Firmware versions on the Devices on Site page where applicable
   
6. Display battery and signal strength icons for applicable devices on the alarm and LiveLink interfaces (quick access to relevant report on click)
7. Configurable APN's for trackers within the webeyeGO Device type
   
8. Added Mute Site and Mute Device icons within alarm interface
   
9. Added Mute Site icon to alarm list page
   
10. Status bar added to the top of Site Details and Devices on Site pages displaying any issues with devices within selected site
    
11. Additional fields added to a device page to store extra information (including 2 SIM fields, Customer Comments, Webeye comments (only editable by Webeye staff)
    
12. New device type for Router added - allow to store information regarding the router on a site (further integrations coming in the future)

1. Dahua SMTP - 'Send Settings to Device' button now automcatically attempts to connect to the device if it is not already connected
2. Fixed an issue where line breaks within a site's handling instructions were not applying on the Site Details section within an open alarm
   
3. Remove DVR from the list of device types (this is only for Videopark devices, DOES NOT include other manufacturers)
   
4. Removed unused/unnecessary options within the Configure page for OCULi HD device types
   
5. Fixed visual bugs for PTZ control and Audio interface pop-outs
   
6. Labels updated on alarm and LiveLink pages for some commands (such as Audio request, LiveLink)
   
7. Move connecting GIF to the same area where a button is pressed instead of always loading in the middle
   
8. Moved errors on the PTZ control pop-out window
   
9. Updated icons for SOS signals
   
10. Fixed display issues for linked videos outside of the webeyeCMS platform
    
11. Resolved Time Zone issues for OCULi HD devices
    
12. Editing a device will no longer automatically disable it if a connection is not made

v3.7

v3.7.1 Hotfix Release

1. Fixed a bug where read-only schedule's weren't matching the device configuration under `Site Details` on alarms.
2. Fixed a bug relating to WebeyeGO battery saving.

v3.7.0 Feature Release

1. Artifeel CheckIn - Support added for Artifeel CheckIn devices within WebeyeCMS.
   
2. what3words - W3W location services integrated into site and alarm interfaces

1. Adjusted the `Date Picker` tool on reporting to orientate horizontally instead of vertically to save space.
   
2. Added user and site time-zone information to device audits for easier understanding.
   
3. Added ability to `Mute` channels for all device types, allowing for more detailed device control.
   
4. Added a time limit feature when live streaming to a device, which will automatically pause the stream after 2 minutes if not `Resumed` within the specific time period stated.
5. Added the device serial number to the title when viewing the device configuration page.
   
6. Added `Signal Strength` report for EZVIZ devices.
7. Added `Device on Site` link to the sidebar within the device reports menu.
   
8. Added read-only notes for device schedules within the `Site Details` button inside of alarms.
   
9. Added timestamp data into battery graphs within device reporting.
   
10. Improved the `Device Connection` status page within the device LiveLink configuration.
    
11. Added transparent `Placeholder` logos within the alarm list for sites without images being used.
    
12. Added the `Subscribe` function to the site menu.
    
13. Improved video viewing functionality by allowing OCULi HD videos to be viewed at 3% rather than 20% download.
    
14. Updated the naming format of the `Device Reporting Dashboard` for easier understanding.
    
15. Updated the naming format of `Devices on Site` within the site menu for easier understanding.
16. Enabled the `Walk Test` function within the `Power Saving Mode` drop down for OCULi HD devices on the device configuration page.
    
17. Added `Battery Percentage` reporting, `Signal Strength` reporting, and Configuration shortcut icons to the device widget.
18. Added new `Reporting Dashboard` icons to the site widget.
    
19. Added new `Reporting Dashboard` icons to the device widget.

1. Fixed a bug where sometimes a device would stay handled by a user who is currently not logged into the platform.
   
2. Fixed a bug with reporting data graphs where the first item of data would be missing.
   
3. Fixed a bug with `Connection Lost/Last Service Check` time not syncing correctly upon connection loss.
   
4. Fixed a bug where no error message would be displayed when attempting to create a duplicate webeyeCONNECT user.
   
5. Fixed a bug within an alarm when viewing multiple videos where full-screen mode would open the first video only.
   
6. Fixed a bug when creating a site ensuring apostrophes can be used in site names.
   
7. Fixed a bug which caused symbols and icons across the platform to not display correctly.
   
8. Fixed a bug with the device cards on sites which incorrectly displayed the `Configuration` button on non-configurable device types.
   
9. Fixed a bug with the device cards which incorrectly displayed the `?` icons for `Battery` and `Signal` monitoring on incompatible device types.
   
10. Fixed a bug on the LiveLink page which would occasionally cause the camera challenge option interface to not align correctly.
    
11. Fixed a bug within alarms which caused the `2 in view` viewing option to not appear.
    
12. Fixed a bug with the `Alarm Response Time` site report which cause data to load slow or not at all.
    
13. Fixed a bug which caused the `Close video` button to not appear when viewing videos through reporting.
    
14. Fixed a bug which caused the `Signal Poll Failure` test date to not default to the current day when setting.
    
15. Fixed a bug which caused the `Battery Reporting` icon on the device widget to break when hitting 0%.
    
16. Fixed a bug which caused additional non supported challenge functions to show on the LiveLink interface when connected to a Videofied panel.

v3.6

v3.6.8 Feature Release

1. Support added for Reconeyez devices within webeyeCMS (Read More)
   
2. Reporting Updates
   
1. Added Alarm Response Time report (Group/Site reporting)
   
2. Added Tamper Alarms report (Group/Site reporting)
   
3. Added the ability to view videos from the Video Signals report, previously you could only download them (Device reporting)

1. Zoom issue in full screen fixed when viewing videos/LiveLink

v3.6.2 Feature Release

1. Added ability to `Pause/Resume` videos by clicking anywhere on the video itself.
   
2. Added ability to `Full screen` videos by double clicking anywhere on the video itself.

v3.6.1 Hotfix Release

1. Fixed an issue where signals were showing blank within the `Other` tab after closing an alarm.

v3.6 Feature and Bugfix Release

1. Support added for customer/group logos, visible on the alarm list and alarm interface.
   
2. New video player added with zoom and pan functionality.
   
3. Unique signal type icons now visible within `Alarm List` and `Alarms`.
   
4. Support added for EZVIZ PT (Pan/Tilt) controls.

1. Fixed an issue where alarm output activation/deactivation was not working via Alarms and LiveLink
   
2. Fixed an issue where certain configuration adjustments weren't auditing correctly on EZVIZ devices.
   
3. Fixed an issue where certain hierarchy icons weren't visible when using dark modes.
   
4. Fixed an intermittent issue where devices were still generating alarms after being muted.
   
5. Fixed an issue where the `View All Devices` function within alarms would only show/hide devices once.

v3.5

v3.5.3 Feature and Bugfix Release

v3.5.2 Bugfix Release

1. Added 'View all devices' function for devices within open alarms.
   
2. Fix for Calipsa verification, manual operator feedback was not correctly altering alarms to the correct tab within Alarm List (Validated/invalidated).
   
3. Fixed serial database check for EZVIZ and webeyeGO devices.
   
4. Fix for SMS requests (WebeyeGO).
   

v3.5.1 Feature and Bugfix Release

1. Support added for WebeyeGO devices within Webeye, containing the following:
   
1. 'Add GPS tracker' and 'Delete GPS tracker' functions within device configuration (Queclink)
   
2. GPS tracking option for WebeyeGO devices, including frequency adjustment.
   
3. Tracker movement alarm functionality, including duration and frequency adjustment.
   
4. Battery box support for WebeyeGO devices
   
5. Battery-saving support for WebeyeGO devices, including arming/disarming schedule adjustment.
   
6. Battery charge monitoring support, including frequency and time/date adjustment.
   
7. Low battery alarm support, with threshold adjustment.
   
2. Support added for EZVIZ devices within IP Camera device type, containing the following:
   
1. Only supports EZVIZ C3A at the moment, further cameras will be supported in the future
   
2. WiFi signal strength, wifi SSID, drive state, firmware version, and battery percentage monitoring for EZVIZ cameras within the device config page.
   
3. Timezone setting dropdown for EZVIZ devices within the device config page.
   
4. Motion detect adjustment slider for EZVIZ devices within the device config page.
   
5. Disk formatting function for EZVIZ devices within the device config page.
   
6. Firmware update function for EZVIZ devices within the device config page.
   
7. Alarm sound adjustment settings for EZVIZ devices within the device config page. (Beep, siren, or mute)
   
8. Arm state monitoring for EZVIZ devices within the device config page.
   
3. webeyeGO EZVIZ app support for iOS and Android (Apple and Google Play Store)
   
4. New permission added for removing the 'Invalidated Alarms' queue from none Administrator users
   

1. Fixed an issue where channels 1 and 2 were appearing as an option on the configuration for Dahua and Hik NVR's. These channels now only appear on IP cameras only.
   
2. Resolved audio spam for WEM alarm types
   

v3.5.0 Feature Release

1. Calipsa Enhanced (Alarm Videos will carry on being sent to Calipsa after even after a video has been marked as Verified)
   
2. ‘Quick View’ alarms from the Alarm List
   
3. Invalidated alarm auto closure (May link into Calipsa enhanced and the Alarm list revamp)
   
4. Verified Only filter within Alarm videos
   
5. Alarm list 'Enhanced video tabs' (Priority and Invalidated queues)
   
6. Alarm signal list pagination improvements
   
7. Dahua Strobe and Siren/Pre-recorded message support (Dahua TIOC only)
   
8. PTZ and audio control livelink pop-out fix
   
9. New 'mouseover' text for livelink Play/pause, HD/SD buttons
   
10. New live stream 'Pause' icon
    
11. Browser lockout feature removal
    
12. Updated online user information (Internal)
    
13. Oculi Day/Night threshold adjustment (Within device config)
    

v3.4

v3.4.2

v3.4.1 Bugfix and Performance Release

v3.4.0 Feature Release

1. PTZ support for Dahua and Hikvision devices
   
2. Support for standalone Hikvision and Dahua IP Cameras (Read More)
   
3. Standalone device details page
   
4. Addition of direct links to configure a device's schedule
   
5. Moved snapshot, group logo and SOS audio storage to S3
   
6. Added support for:
   
1. Dahua IPC cameras
   
2. Dahua Thermal cameras
   
3. Some older firmware versions on Dahua NVRs.
   

1. Live stream frame rate improvements on Dahua devices
   
2. Faster page navigation within a group with a large number of sites
   

1. Bugfix to keep video analysis settings upon device move
   
2. Bugfix for character escaping
   
3. Bugfix to disallow invalid site timezones
   
4. Bugfix to disallow invalid arming schedules for Oculi devices
   
5. Bugfix for changing a users default device
   

v3.3

v3.3.6 Hotfix

1. Re-implement alphabetical ordering of sites with manage
   

v3.3.5 Bugfix and Performance Release

1. Improved loading times for large hierarchies
   
2. Reports are now run on a secondary database (reduces load on the main database)
   
3. Improved loading times for enabled and disabled device reports
   
4. Device audits can now be accessed on archived sites
   
5. Status indicator now reverts back to online once connection to webeyeCMS is restored
   
6. Subscription search display issue fixed
   
7. SMS fix for certain numbers
   

v3.3.4 Bugfix

1. Fix for Calipsa feedback
   
2. Fix for muting all devices on a site
   
3. Fix for filtering the alarm closures report
   

v3.3.3 Bugfix

1. Fix Signal count script
   

v3.3.2 Bugfix

1. Performance improvements for Timeline
   
2. Usability improvements for Timeline
   
3. Added SOS functionality to Timeline
   
4. Added Timeline functionality to closed alarms
   
5. Users are no longer directed to reports when logging in
   
6. Performance improvements when fetching alarm signals
   
7. Fix for SOS signals not displaying when they have negative latitude or longitude
   
8. Fix for SOS signals displaying null when no user is associated with the signal
   
9. Fix for moved devices not displaying on sites
   

v3.3.1 Patch

1. Timeline
   
1. Data fetch speed improvements
   
2. Show alarm open and closure on Timeline
   
3. Do not block alarm access while loading
   
4. Improved data polling logic
   
5. IE11 support
   

v3.3.0 Feature Release

1. Dahua NVR now integrated into webeyeCMS (Including Direct and P2P Connection types bringing live connection to cameras connected to NVR, toggle NVR/DVR Outputs, 2 Way Audio) (See setup guide here)
   
2. Hikvision Alarm Outputs can be toggled for NVR's (Direct connection only) (See Video)
   
3. Send SMTP details directly to NVR/DVR for Dahua (requires P2P or Direct Connection to be configured) (See Video)
   
4. Send SMTP details directly to NVR/DVR for Hikvision (Requires direct connection to be set up) (See Video)
   
5. Live streaming can now switch between sub-stream and main-stream (Applies to P2P and Direct connection) (Read More)
   
6. Video viewing can now commence from 5% on Videofied systems and download percentages update more often (See Video)
   
7. Timeline for signals in alarm added to alarm viewing and site interfaces (Read More)
   
8. Effects can be applied to videos and live streams throughout the platform (Saturation, Brightness, Contrast, Invert) (See Video)
   

1. New devices page when editing/viewing a device within a site (with available View option on each device to access this page) (See Video)
   
2. Black theme added (See Video)
   
3. Button name changes so options are consistent throughout (Eg, Update User, Update Site)
   
4. Save Changes buttons now added to site/device changes for clarity
   
5. Site Summary is now dockable (depending on resolution) (See Video)
   
6. LiveLink now uses similar video viewing as the alarm interface (4 in View, pop-out, etc) (See Video)
   
7. No connection code pop-up when LiveLinking to a device that does not require one
   

1. Fixed scrolling issue when searching 'Groups' on the top left
   
2. Fixed blurring issue where image behind is being offset
   
3. Clear up unused scripts/classes throughout
   
4. Upgraded backend emailer
   
5. Updated Site-Database interfacing
   
6. Alarm signals now use User set TimeZone
   
7. Master commissioning group users can no longer downgrade their own Group Type
   
8. Hikvision
   
1. Fixed bug where the enhanced video was sometimes fetched from the wrong channel if combining IP and analogue cameras on a hybrid NVR. Only P2P was affected.
   
2. Fixed bug where you could not simultaneously stream from multiple cameras on the same NVR/DVR (only P2P was affected)
   

v3.2

v3.2.3 Bugfix

1. Fixed issue where Calipsa no longer analyses video when the site is moved
   

v3.2.2 Patch

1. Improved email management
   

v3.2.1 Bugfix Release

1. Display issues on iOS
   
2. Alarm data performance fix
   
3. Search bar for mobile devices
   

v3.2.0 Feature Release

1. Two-way audio - there is a new command "Audio Connect" for connected Hikvision devices (Read More)
   
2. New top bar with enhanced management including:
   
1. Quick search for Groups, Sites, Users (Video)
   
2. Alarm list count on every page (polls every 5 seconds) and profile access/options with user logout (Video)
   
3. Alarm tone options, choose a preferred alarm tone (Video)
   
4. Archived sites have been revived - you can now archive sites again, an archived site is read-only (Video)
   
5. Bulk management:
   
1. Select sites using control-click, shift-click and dragging over, similar to how Windows works (Video)
   
2. Move Sites (Video)
   
3. Subscribe/Unsubscribe (Video)
   
4. Archive/Unarchive (Video)
   
6. To open a site summary you now need to double click on a site
   
7. Clearer message showing you are not the current handler of an alarm 
   

v3.1

v3.1.3 Bugfix and Performance Release

1. Device token is now visible on the user devices page
   
2. Bug fix: Keyholders not showing in alarm history
   
3. Performance upgrades for handling an alarm
   

v3.1.1 Bugfix Release

v3.1.0 Feature Release

1. Added Google Analytics event Tracking
   

v3.0.4 - Minor Feature Release

v3.0.3 - Minor Feature Release

1. Allow administrators of Master Commissioning Groups to suspend devices
   
2. Added Device Commissioning group type
   
3. Allow users of Master Commissioning and Commissioning groups to create further Device Commissioning and Commissioning groups
   

v3.0.2 - Minor Feature Release

1. Fixed issue with the Effective Commissions report ordering
   
2. The visual alarm list notification is now removed when the alarm list becomes empty
   
3. Hikvision alarm video configuration options
   

v3.0.1 - Bugfix Release

1. Fixed issue with slow site list loading within Manage
   
2. Fixed issue with automatic scroll to opened group within Manage
   

v3.0 - Feature Release

1. Updated interface design with modern styling
   
2. Direct connection support for Hikvision Recorders (see the setup guide)
   
3. Support for Visonic devices using ContactID
   
4. Improved webeyeRAPID LiveLink
   
5. Device enumeration feature (read more)
   
6. Enumeration muting feature (read more)
   
7. OCULi signal strength and battery reports (read more)
   
8. Site in alarm indicator on Manage
   
9. Signal counts while viewing alarms
   
10. New signal indicator while viewing alarms