Quick Start Guide - Wired webeyeFOG - 1840E

• Related Articles

• Control Panel - Quick Start Guide

  Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...

• Takex Flame Sensor - Quick Start Guide

  Takex Flame Sensor - Quick Start Guide Hardware Overview The Takex flame sensor is a detector that triggers from the ultraviolet rays contained in flames which then send the trigger to the door contact contained within the base of the unit. Find ...

• Quick Start Guide - Wireless webeyeFOG to Relay Wiring

  Quick Start Guide – Wireless webeyeFOG to Relay Wiring Installation Tips 1. Avoid direct sunlight. 2. Avoid aiming directly at air conditioning or heating vents. 3. Avoid vapour or high humidity that may cause condensation. 4. Do not smoke during ...

• Siren (External) - Quick Start Guide

  Siren (External) - Quick Start Guide Hardware Overview Pairing the Siren To pair a siren onto the control panel, go into the Sirens section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the page and ...

• Door Contact - Quick Start Guide

  Door Contact - Quick Start Guide Hardware Overview Pairing the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The configuration modes will then show as ...