Related Articles
External RF Antenna Guides
Please see attachments.
Control Panel - LEDs Explained
Control Panel - Buttons and LEDs Buttons Switch 1 When the control panel is asleep, press SW1 to see the current status of the control panel (Power, Alarm State, Communication) When the control panel is awake, hold SW1 to change communication method, ...
Control Panel - Quick Start Guide
Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...
Badge Reader - Quick Start Guide
Badge Reader - Quick Start Guide Hardware Overview Pairing the Badge Reader To pair a badge reader onto the control panel, go into the Readers section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the ...
Snapshots
Introduction Snapshots can be taken whilst viewing alarm footage or whilst live streaming directly into a camera. These can then be saved as a reference to an alarm, or be sent as an email. Once a snapshot is taken they can be edited using the tools ...