Webeye Support Portal | Knowledge Base

Recent Articles
Door Contact - Quick Start Guide
Door Contact - Quick Start Guide Hardware Overview Pairing the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The configuration modes will then show as ...
Siren (External) - Quick Start Guide
Siren (External) - Quick Start Guide Hardware Overview Pairing the Siren To pair a siren onto the control panel, go into the Sirens section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the page and ...
Badge Reader - Quick Start Guide
Badge Reader - Quick Start Guide Hardware Overview Pairing the Badge Reader To pair a badge reader onto the control panel, go into the Readers section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the ...
External Camera - Quick Start Guide
External Camera - Quick Start Guide Hardware Overview Pairing the Camera To pair a camera onto the control panel, go into the Wireless Sensors section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the ...
External RF Antenna Guides
Please see attachments.

Popular Articles
webeyeCMS Platform
Latest Release: v4.1.1 - 13th March 2024 Below you will find a list of features added in recent versions of webeyeCMS. For more information, please contact us via this support portal v4.1 v4.1.1 Bugfix Release Release Date: 13th March 2024 Bugfix's ...
Common SIM APN Settings
A full list of APNs for our Current and Legacy SIM cards are available for download below in the pdf document.
OCULi Wireless PIR Camera - Setup & Advanced Configuration
Each OCULi device comes pre-configured to work with the bundled SIM card and to send alarms through to webeyeCMS. All OCULi devices supplied by Webeye are fitted with battery isolators to prevent unnecessary power usage prior to installation. These ...
What is Signal Poll Failure?
Signal poll failure is a feature provided by webeyecms. When enabled on applicable devices, an alarm will be generated if no signals have been received for a defined period of time. Signal poll failure can be configured upon initial device creation ...
webeyeCMS Android v2.4 Update - Change to Alarm Notification
webeyeCMS for android has been updated today (25th October 2017) to v2.4. This update should be available for users within 24 hours worldwide. Change to Alarm Notification At present, alarm notification sounds are played through the Media channel. ...

Knowledge Base