Vigileyez Receiver

Vigileyez Receiver

Info
Latest Release: v1.3 - 10th July 2025
Below you will find a list of features added in recent versions of the Vigileyez receiver. For more information, please contact us via this support portal 

v1.0

v1.3 Feature and Bugfix Release

Release Date: 10th July 2025

Features

  1. Use new record log on heart beat for battery monitoring.
  2. Add antenna value to panel details.
  3. Filter panel warnings / errors from panel details.
  4. Add "Zone Tamper" to video generating events.
  5. Add URL Encoding to JSON sent to config app to allow device names with reserved chars.
  6. Use alarm Id for video to signal matching for manual requests.
  7. Support new CODid event map.
  8. Do not process some event types (User Code Recognized, Daily Restart, System Reset, Power Down Modem, Connected Panel, Disconnected Panel).

Bugfix's

  1. Minor bugfix's.

    • Related Articles

    • Vigileyez Firmware

      Latest Release: v800.41.15 - 16th June 2025 Below you will find a list of features added in recent Vigileyez firmware. For more information, please contact us via this support portal v800.41 800.41.15 Feature and Bugfix Release Release Date: 16th ...

    • Control Panel - Quick Start Guide

      Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...

    • RF Antenna - Installation

      Installing RF Antennas Required Vigileyez Control Panel 2x RF Antenna Cable glands 16mm drill bit (if the holes are not already pre-drilled) Preparing the control panel If the sides of the control panel do not have a blanking gland OR is already ...

    • Dahua Receiver

      Latest Release: v1.3.2 - 15th August 2023 Below you will find a list of features added in recent versions of the Dahua receiver. For more information, please contact us via this support portal v1.0 v1.3.2 Feature Release Release Date: 15th August ...

    • Internal PIR Detector - Quick Start Guide

      Internal PIR Detector - Quick Start Guide Hardware Overview Pairing the Detector To pair a PIR detector with the control panel, go into the Wireless Sensors section of the configuration. Put the panel into pairing mode by unlocking the receiver at ...