Related Articles
External RF Antenna Guides
Please see attachments.
Control Panel - Fitting the mounting plate
Control Panel - Fitting the mounting plate Positioning and Fitting the plate The mounting plate should be attached to the panel before fixing it to a structure. Ensure that the countersunk holes around the edge of the plate are facing away from the ...
Control Panel - LEDs Explained
Control Panel - Buttons and LEDs Buttons Switch 1 When the control panel is asleep, press SW1 to see the current status of the control panel (Power, Alarm State, Communication) When the control panel is awake, hold SW1 to change communication method, ...
Control Panel - Quick Start Guide
Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...
Door Contact - Quick Start Guide
Door Contact - Quick Start Guide Hardware Overview Pairing the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The configuration modes will then show as ...