Quick Start Guide - Wireless webeyeFOG

Quick Start Guide - Wireless webeyeFOG

Please see attachments
    • Related Articles

    • Control Panel - Quick Start Guide

      Control Panel - Quick Start Guide This quick start guide will go through the different elements of the control panel. Hardware Overview Inside the control panel Locating Panel Serial/IMEI The control panel identifiers can be found on the packaging of ...
    • Quick Start Guide - Wireless webeyeFOG to Relay Wiring

      Quick Start Guide – Wireless webeyeFOG to Relay Wiring Installation Tips 1. Avoid direct sunlight. 2. Avoid aiming directly at air conditioning or heating vents. 3. Avoid vapour or high humidity that may cause condensation. 4. Do not smoke during ...
    • Door Contact - Quick Start Guide

      Door Contact - Quick Start Guide Hardware Overview Pairing the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The configuration modes will then show as ...
    • Takex Flame Sensor - Quick Start Guide

      Takex Flame Sensor - Quick Start Guide Hardware Overview The Takex flame sensor is a detector that triggers from the ultraviolet rays contained in flames which then send the trigger to the door contact contained within the base of the unit. Find ...
    • Apollo Outdoor Manual Call Point - Quick Start Guide

      Apollo Outdoor Manual Call Point - Quick Start Guide Hardware Overview The outdoor call point from Apollo is a resetable manual call point. When triggered, closes the circuit generating an alarm from the door contact. Find specification sheets and ...