Related Articles
Challenger Overwatch - Camera mounting guide
Challenger Overwatch - Camera mounting guide Introduction This guide outlines how to mount the cameras to the Challenger Overwatch equipment. This is also applicable for similar mounting solutions. Required (per camera): 1x M4 x 20mm bolt 1x M4 Nut ...
Control Panel - Fitting the mounting plate
Control Panel - Fitting the mounting plate Positioning and Fitting the plate The mounting plate should be attached to the panel before fixing it to a structure. Ensure that the countersunk holes around the edge of the plate are facing away from the ...
OMV-VX200
Please see attachments
RF Antenna - Assembly Guide
External RF Antenna - Assembly Guide Contents and Tools required Included Wall bracket Upright pole (with 2 circular mounting nuts) Antenna head 4x antenna spokes Antenna Cable Not Included H2 Hex bit Bracket assembly Take one of the circular nuts ...
External Camera - Quick Start Guide
Hardware Overview A cable is only required when utilising a solar panel with the rechargeable battery. Pairing the Camera To pair a camera onto the control panel, go into the Wireless Sensors section of the configuration. Put the panel into pairing ...