Input & Output Board

Input & Output Board

Please see attachments
    • Related Articles

    • Door Contact - Quick Start Guide

      Door Contact - Quick Start Guide Hardware Overview Pairing the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The configuration modes will then show as ...
    • Takex Flame Sensor - Quick Start Guide

      Takex Flame Sensor - Quick Start Guide Hardware Overview The Takex flame sensor is a detector that triggers from the ultraviolet rays contained in flames which then send the trigger to the door contact contained within the base of the unit. Find ...
    • Apollo Outdoor Manual Call Point - Quick Start Guide

      Apollo Outdoor Manual Call Point - Quick Start Guide Hardware Overview The outdoor call point from Apollo is a resetable manual call point. When triggered, closes the circuit generating an alarm from the door contact. Find specification sheets and ...
    • webeyeFOG Wired - Activation Via Alarm System

      Please see attachments
    • GV50M Tracker Manual

      See attached manual for the GV50M trackers. Configuration of the device is done directly from webeyeCMS when added. Connecting the tracker Make sure the SIM Card is inserted. The tiny black sliding switch is pushed towards the SIM Card, this allows ...