Related Articles
Internal PIR Detector - Quick Start Guide
Internal PIR Detector - Quick Start Guide Hardware Overview Pairing the Detector To pair a PIR detector with the control panel, go into the Wireless Sensors section of the configuration. Put the panel into pairing mode by unlocking the receiver at ...
Internal PIR Detector with Microwave - Quick Start Guide
Hardware Overview Pairing the Detector To pair a PIR detector with the control panel, go into the Wireless Sensors section of the configuration. Put the panel into pairing mode by unlocking the receiver at the top of the page, and start Refresh at ...
Takex Infrared Beam Detector (TXF-125) - Quick Start Guide
Hardware Overview Coming Soon Wiring the door contact Coming Soon Pairing and configuration of the Door Contact Note; when using certain device configurations, applying an area to that mode will enable it and removing the area will disable it. The ...
Apollo Outdoor Manual Call Point - Quick Start Guide
Hardware Overview The outdoor call point from Apollo is a resetable manual call point. When triggered, closes the circuit generating an alarm from the door contact. Find specification sheets and manuals attached to this article for the call point ...
Heat Detector
Please see attachments